
| ■ | 특징(Features) |
|---|---|
| (AUTO BLANK MEASURING)측정방식 | |
| 측정시간의 경과에 따르는 바탕시료 값의 변화를 최소화시키기 위하여 매번 자동적으로 제로 값을 실시간으로 측정하여 보정해서 시간 경과에 따르는 떨림 현상을 최소화 | |
| AGC(Automatic Gain Control)회로 채용 | |
| 온도에 따른 빛의 세기를 PHOTODIODE PREAMP의 GAIN을 내부CPU에서 자동적으로 수행하도록 설계 | |
| LC mirror Changer 시스템 | |
| LAMP CHANGING MIRROR는 LC MOTOR와 바로 연결되어 벨트 타입의 MIRROR에서 발생되는 BANKLASH 현상을 최소화하여 전원 ON시 자동적으로 최대광량을 찾아 광량과 파장 정밀도가 우수 | |
| 다량-다수의 시료를 한번에 측정가능 | |
| CELL HOLDER(8CELL, ROTARY TYPE)을 이용하여 한번에 정확한 시료측정가능 | |
| 인터페이스를 이용하여 사용자가 편리 | |
| PC WINDOWS SOFTWARE인 OPTIZEN VIEW를 이용하여 PC에서 사용시( R232C 케이블이용) 사용자가 손쉽게 사용가능 |
| ■ | 규격(Specifications) |
|---|---|
| - Wavelength Range : 190nm to 1100nm | |
| - Spectral Band pass width : < 1nm | |
| - Wavelength Accuracy : < ± 0.5nm | |
| - Wavelength Reproducibility : < ± 0.1nm | |
| - Monochromator : Modified Czerny-turner type With 1200 lines/mm Blazed grating | |
| - Stray Light : 0.05 %T at 220 & 340 nm | |
| - Photometric Range : -0.1 to 3.0A, 0 to 125% | |
| - Photometric Accuracy : < 1% at 1A | |
| - Photometric Reproducibility : ± 0.001A | |
| - Noise Level : < 0.001A | |
| - Drift : 0.002A/hr at 340 nm | |
| - Stability : ±0.002 A/hr | |
| - Light Source : Tungsten and Halogen lamp and Deuterium lamp | |
| - Display Mode : Backlight, Graphical, Liquid Crystal Display with Contrast Control | |
| - Sample Holder : Automatic Rotary type 8-position Multi-Cell Holder | |
| - Interface Ports : RS-232C Serial and Centronics ports | |
| - Wavelength Slew Rate : 5000nm/min | |
| - Wavelength Scan Rate : Maximum 1000nm/min | |
| - Standard Capability : Absorbance / % transmittance, concentration and file manager | |
| - Real-Time PC S/W : Automatic multi-cell & multi-wavelength measure Advanced multi-survey scan High order standard curves Time based scan(simple kinetics) Absorbance ratio User defined function |
|
| - ABS/%T/Conc. : Display of all Data -%T, ABS, Concentration Measure Absorbance at up to 10 Wavelengths Multi Selectors 1 to 7 Cell Number Selected Unit |
|
| - Survey Scan : Scale Mode-Manual, Auto, Cursor, Peaks Valleys ABS.<->%T Conversion |
|
| - Standard Curve : Single-Point Calibration Curve(Zero or Non-Zero) Multipoint Calibration Curve Method (1 st ~3 rd order Regression Curve or Segmented Standard Curve) Manual Standard Curve: Input Concentration and ABS up to 7 |
|
| - Simple Kinetics : Measurment Total Time: 2hr, Interval Time:≥1Sec 이상 Data View Type: Graph, or Activity/min |
|
| - ABS Ratio : Data view Type- Graph or Table 260/280 Ratio Without Background Correction 260/280 Ratio Without Background Correction at 320nm |
|
| - Inhibition Mode : Select a wavelength for Inhibition(at 412nm) Auto Measuring: Blank/Control Cell Special Inhibition: Kinetic Inhibition |
|
| - Self-Test Mode : Auto-Check- Halogen Lamp, Deuterium Lamp, Wavelength Calibration Wavelength user Setup: Correct for Wavelength Calibration |
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기
측정기&계측기